Partitioning your Sd card (CWM)

Partitioning your Sd card:
Backup
Before starting with partioning , you need to take the backup of your sd card(memory card)As this process gonna wipe all ur data from the sd card
Reboot in recovery>Advance>Partition ur sd card---->yes!Now,Select a partition size- 256mb/512mb/1024mb* and Swap size 0mb**
Now recovery will take time for partitioning the sd card with onscreen commands
Done! (This may flash on the screen too)
Go back>Go back >Reboot system!






*(This will be the size of sd space used for storing apps and data).


**(Swap memory is a partition of sd which is used to store data when there is no free RAM)






By-


Avadhut P. Kathe

How To Boot Into Android Safe Mode On Your Smartphone / Tablet

Android has now become a generally pretty stable platform/operating system for smartphones an tablets, and every new iteration only adds to that. Long gone are the days when an Android Device would go into constant freezes, get repeated app Force Closes, or would generally become sluggish in performance; a huge of contribution of that goes to the open source development community, too, that strive day and night to make our devices more useful and stable. However, there still might be time when you install an app that doesn’t agree with your operating system or firmware version, or that might have some broken pieces of code, or any other issue, resulting in the same problems that we discussed above. Even worse are the cases when you start suffering from severe battery drain, or when the device itself goes into a boot loop after having installed a certain APK. For all those cases, Google has built-in a neat hidden feature in Android, called safe mode.



If you’ve ever used a Windows-based PC, you would probably be familiar with how safe mode operates. Akin to the desktop OS, Android’s Safe Mode boots up the device with minimal configuration, loading only the apps in /system partition and disabling all others, along with the wallpaper, widgets, and any other customizations that you may have, so you can identify and remove the source of the problem. For developers, this ispretty common knowledge, but even a casual user can benefit out of it.




Why would you need safe mode on Android?





There can be multiple reasons for wanting to boot your Android phone or tablet in safe mode. Since this mode loads only the Android system apps, and eliminates all the third-party components from the start up sequence, you can identify if the problem was caused due to an app that you deployed later. Let’s say you were facing severe battery drain; safe mode will let you pin-point as to whether (perhaps) a widget was responsible for it or not. Then, if you have a device that’s stuck in boot loop, the said mode will let you check if it’s a bootloader problem, or if you have just got something running that causes the boot sequence to complete, but fails the operating system itself to start.











How do I know if my Android is in safe mode?



That’s fairly easy, and there are distinct markers to determine if your smartphone is in safe mode. First, you will have “Safe Mode” splashed across the bottom-left corner of your device, and that will be there on every screen. Then, you won’t be able to launch any third-party apps while operating in this mode. Furthermore, any external widgets that you may have, will fail to load up properly. Your wallpaper will be disabled, too.





How to put an Android into safe mode at boot sequence?







There’s, unfortunately, no standard way to do that, because even though Google has included it within AOSP, most OEMs choose to hide it, or apply obscure key combinations to achieve that. In general, there are certain pointers that will help you achieve Safe Mode at booting sequence, for a device that is in a boot loop.




Try holding both the volume keys pressed when booting

Pressing and holding the menu key when starting up the phone

For devices with capacitive buttons, make sure to hold the menu key when the LED underneath lights up, release it when LED turns off, and then pressing and holding again when it lights up again. This is to ensure that you don’t miss the key press just because the button chose to disable itself at that time.





Again, since these methods vary from device to device, trying them out one-by-one might help you. However, it should be noted that you would do it once the splash screen shows up – doing so earlier will interrupt the bootloader, and most likely put you in recovery or bootloader menu instead of getting safe mode.



Rebooting an active Android device into safe mode





This is much easier than the former process, although the method differs for stock firmware and AOSP-based ROMs like CM10, AOKP etc.





On a stock ICS or Jelly Bean ROM, press and hold the power button until the power menu shows up. Then, hold down the Power Off/Shut Down option, until you see a dialog box asking you to confirm rebooting to safe mode. Hit OK when that happens, and the next reboot will put your Android into safe mode.







On an AOSP ROM, especially CM10.1 (Android 4.2 Jelly Bean base), press and hold the on/off button like before to get to the Power menu. Then, instead of the Power offoption, press and hold Reboot. You’ll see the same dialog box, wherein tapping OK will put your Android into safe mode.



Android’s safe mode is perhaps moreuseful than what Windows offer for desktops, since it’s far easier to troubleshoot problems using this as compared to its PC counterpart. It’s unclear as to why manufacturers would choose to hide something this useful so obscurely, but in AOSP, this is definitely easier. While we hope you never encounter an issue that requires you to try this, it’s a handy solution to have up your sleeve, should be need arise.





thx to Avadhut P. Kathe

SD Card Partitioning

This is meant to help you with easy partitioning the SD card to create:




ext2 partition (for android app2sd and other tricks)




swap partition (for android swap creation)


Windows using MiniTool Partition Wizard Home Edition


Simplest way is to use "MiniTool Partition Wizard Home Edition" fromhttp://www.partitionwizard.com/download.html


This tool is compatible with Windows 2000/XP/Vista & Windows 7


requirements: USB SD Card reader.


pull SD card from phone, insert into USB SD Card reader. Windows should report new drive and content of the drive should be visible.
step 1: delete old partitions on SD card


Note: this partition manager QUEUES the operations. So nothing is deleted and changed UNTIL you click "APPLY" and then confirm by clicking "OK".


WARNING!


Make sure you are deleting partition on SD card! (not your hard drive for example)


This step deletes everything on SD card, so backup files first!


Dont be afraid, just read everything and think twice before selecting correct drive.


Do you see three gray icons on the bottom? Under each of them the capacity of each drive is listed, and SD CARD has slightly different icon.


Hard drives on the screenshot have 465.8GB and 74.5GB, and on the bottom, the SD card, with 3.8GB capacity.











step 2: create FAT or FAT32 partition


select "Create As": PRIMARY


Select "File System:" FAT when you have 2GB or smaller card.


Select "File System:" FAT32 when you have 4GB or greater card.











step 3: create ext2 or ext3 or swap partition*






select "Create As": PRIMARY


Select "File System:" ext2 - for App2SD


OR


Select "File System:" swap to make swap :)


If you want to create both: do not assign all the space for the first one :) this way you will have space for creating second one.











step 4: finish


finally, click "apply" button on top left corner.


partitions will be created and card will be formatted.


By-


Avadhut P. Kathe


thx to Mohammad Uvais

Root without PC

Finaly i get know how to root tipo without pc if u want root ur mobile without pc than follow this steps:



i)download port debug.apk from below link

ii)than install and open app

iii)when u open app it wiil go in play store and after loading there u see app name MINISTRO II

iv)install that app nd after installing that app open port.apk (app which u download in i step)

v)it will ask for u to download directory

vi)click yes

vii)after downloading three optins will come and u have to click.on first option

viii)after clicking option 1 it will go in play store to download superuser and u hve to download superuser

ix)now reboot ur phone nd now ur phone is rooted


If U LIKE MY WORK THEN CLICK ON LIKE

https://m.app.box.com/index.php?rm=box_download_shared_file&file_id=f_11093529833&shared_name=4y2mlm36qk81v3lh91jy



Tested by Hritik D. Miglani


Original post: https://www.facebook.com/groups/sonytipo/602426209820083/





thx to Palash Choudhury

SUPER CHARGE V6 (DETAIL)

Vishal, 2013. június 16., 22:38

SUPER CHARGER V6 (ROOT NEEDED) 

Reasons why to super charge xperia tipo

1. to get more RAM

2. Increases speed of loading images in Gallery 

3. No lag in any applications or in games 

4. Increases Smoothness of tipo 

5. Run lots of apps ram is scheduled very well

--- Enjoy---


SCREENSHOTS :

https://www.facebook.com/photo.php?fbid=10200130106243110&set=gm.544775502251821&type=1&theater

How to do ??? Just follow the steps I mentioned.

1. Download script manager from playstore

(" https://play.google.com/store/apps/details?id=os.tools.scriptmanager&feature=search_result#?t=W251bGwsMSwxLDEsIm9zLnRvb2xzLnNjcmlwdG1hbmFnZXIiXQ.. ")

2. download busybox from playstore

(" https://play.google.com/store/apps/details?id=stericson.busybox&feature=search_result#?t=W251bGwsMSwxLDEsInN0ZXJpY3Nvbi5idXN5Ym94Il0. ")

3. download superscript and put it on your sdcard

    link : https://www.box.com/s/sce0mlnbocxb82haznrq

4. open busybox and click on install and wait to finish for installation.
    then, open script manager
     -> select "browse as root"
     -> go to superscript that you downloaded to sdcard and select it
     -> click on "su" and then click on run

5.  follow the instructions mentioned on the screen

    for  scrolling speed enter option 1 and click enter ( - VOL button)

    for kernel strength enter option n and click enter ( - VOL button)

    for installation method like (automatic, manual, exit ) enter x 

    for 3g turbo enhancement  enter Y

    for Enable miscellaneous &sd card speed tweaks enter no

    for disable boot animation press anykey except y

   for enter [1-33] option enter 31 which reboots your phone 

6. FINISHED  TIPO IS NOW SUPERCHARGED TO 50% (thats enough)

                                 but wait!!


NOW, YOUR PHONE HAS BEEN SETUP SUPERCHARGER, BUT NOT AUTO START IF YOU REBOOT PHONE. OK DO THIS TO MAKE SURE SUPERCHARGER AUTO START EVERY TIME YOU BOOT YOUR PHONE.


1. OPEN SCRIPT MANAGER

2. PUSH BACK BUTTON TWICE

3. OPEN DATA FOLDER(/data) from any root browser , AND FIND 99SUPERCHARGER.SH FILE. CLICK ON IT TO OPEN IT.

4. TICK 'SU' AND 'BOOT' , SAVE OR RUN.

5. CLOSE THE SCRIPT.

NOW. YOUR SUPERCHARGER WILL AUTORUN IN STARTUP EVERY TIME YOU REBOOT YOUR PHONE... -DONE-



if u want 100% supercharge level, then install  "ULTIMATIC JAR PATCH TOOLS"

download:

link : https://www.box.com/s/hwn90nwpgobmg24gm4d1

Installation :

1. download the above zip file to system and connect your mobile in debugging mode

2. Extract the zip file on system and run the 'ultimatic_jar_patcher_adb.bat' file

3. follow the instructions on the command prompt it will take upto 2-3 minutes.

4. finally when all the files are patched automatically it will push to your mobile at the time wait for the dialogue asking for enter "Reboot" or "exit" 

5. Enter reboot to restart your mobile and exit to leave the command prompt.  

                                             " Finally DONE"


NOTE:  IF Script manager says doesn't found busybox then goto busybox and click on install and wait for installation.

enter means -vol button

---> FINALLY DON'T UNINSTALL SCRIPT MANAGER OR BUSYBOX IT DOESN'T EAT  YOUR RAM.
-----------------------------------ENJOY-------------------------------------

Dolby Digital For STOCK ROM (Single and Dual)

Vishal, 2013. szeptember 9., 11:39

NEEDED :

1. CWM

2. WALKMAN (Any)
3. take a  Backup before you do this using CWM.


Download:

http://www.mediafire.com/download/vr5h7di1tnyxq45/%5BAC!D%5DDolbyDigital%5BAddon%5D_signed.zip

Installation :

1. Download the dolbyzip and place it in the SD card/External card

2. Reboot to CWM and Install the Zip  and clear Dalvik Cache

3. Reboot

4. DONE

Enjoy Dolby ON STOCK WALKMAN.